SEMCO, Inc.

P.O. BOX 1216

Lamar, CO  81052

800-541-1562

S30,000 Spec Sheet

Well Service Unit:  Used for installation of large submersible pumps, line shaft turbines and well completion.  The A-Frame design telescopic derrick has double 6" cylinders for hydraulic erection,  two 5" hydraulic outriggers at rear and 6000# tail out winch for Scoping Derrick

 The specifications are as follows:

 Model Number: S30,000

Boom Capacity:  60T-4L Down Position, 6’ Lay Back

Standard Vertical Boom Reach:  40’

 Horizontal Boom Reach:  10' 

Main Winch with Fail Safe Brake

Capacity:  30,000 lb..  Single line

                   60,000lbs.. Double Line

                   120,000lbs.. Four Line

                   (All Ratings Low Speed )

Cable: 275' of 3/4" diameter XIPS

Speed: 140 ft/min.

Hydraulic Control :  Manual

 

Sandline Winch with Disc Brake (free fall)

Standard Capacity: 4,000 lb.. single line

Cable: 2,000' of  1/2" diameter

Variable speed:  480 ft/min. (Maximum Bare Drum)

Hydraulic Control : Manual

Larger Sand Reel Available

Front Outrigger    

Options: Hydro Breakout Cylinder with Valve

                Cathead w/ Valve

                Hydro Oil Cooler 12 VDC Double Fan-4

                 48’ to 60’ Derrick

                2 Speed Mainline Winch w/ Grooved Drum

                Air Brake Sandline

                Light Kit for Mast

                Power Arm

 Storage:    2 lockable tool boxes (96" x 13" x 16-1/2")

                    2 lockable tool boxes (78" x 13" x 16-1/2")