SEMCO, Inc.

P.O. Box 1216

Lamar, Colorado 81052

PH: 719-336-9006 FAX: 719-336-2402

         
J&K ORANGE PIPE HOLDER- KWIK KLAMP
         

1-2                 PVC or Galv.                                          $280.00

2 1/2- 4        PVC or Galv.                                          $530.00

5                    Conversion 10 Jaw Pads and 20 Bolts   $795.00

6                    PVC Use Only                                        $555.00

         

Kwik Klamp 3 jawsKwik Klamp 3 open

         

J&K KWIK KLAMP 1-2

                + All steel construction but light weight-only 14 lbs.
                + Easy to operate, over center locking of jaws when downward pressure is applied to lever.
                + KWIK KLAMP allows workers to bring pipe joint up to an easy working level.
                + Equipped with serrated and hardened replaceable jaws.
                + Excellent holding capability with load tests over 3500 lbs.
                + Designed to hold pipes 1" through 2" PVC, stainless, & galvanized.
                + Safety pin to prevent accidental unclamping.
                + KWIK KLAMP is one of the safest time saving tools you will ever own.

                Kwik Klamp 1 holding 2" stainless steel pipe on 8" casing.
                The wide klamp base fits on many casing sizes
.

J&K KWIK KLAMP 2 for Pipe Sizes 2 1/2" - 4"

        +Main body is constructed of 2" and 2 1/2" 1/4" wall steel tube.

        +Easy to operate, over center locking of jaws when downward pressure is applied to a 19" long lever handle.

        +1/2" Safety pin used to prevent accidental unclamping.

        +KWIK KLAMP2 allows workers to bring pipe or drill joint up to and easy working level.

        +The tool weights only 30 lbs. and is 20" long x 7 1/2" wide.

        +Jaws are equipped with 16 carbide tipped grippers.

        +Excellent holding capability, with load tests done over 7,000 lbs.

        +Designed to hold pipes 2 1/2", 3" and 4" PVC, HDPE, stainless and galvanized steel.

 J&K Kwik Klamp 3 for Pipe Sizes 5-6

                +The heavy duty KWIK KLAMP 3 is designed to hold 6" PVC pipe.

                + This Klamp can also hold 5" pipe with an additional jaw set.

                +  The KWIK KLAMP 3 is very similar to the KWIK KLAMP 2 which is  for pipe sizes 2 1/2" through 4". 

                + The Kwik Klamp has been used worldwide by environmental drillers, pump installers, well serviceman, and       water well drillers.

                +Main body is constructed of 2" and 2 1/2" 1/4" wall steel tube.

                +Easy to operate, over center locking of jaws when downward pressure is

                 applied to a 19" long lever handle.

                +1/2" Safety pin used to prevent accidental unclamping.

                +KWIK KLAMP 3 allows workers to bring pipe or drill joint up to an easy working level.

                +The tool weights only 37 lbs. and is 20" long x 7 1/2" wide.

                +Jaws are equipped with 20 carbide tipped grippers (3/8-16x1/2).

                +Excellent holding capability, with load tests done over 7,000 lbs

                +Designed to hold 6" PVC or HDPE pipe.         

 
 
 
Home Contact Us Products

Prices subject to change without notice. 01-01-12